Saturday, April 1, 2017

Printer back to working

It took a bit longer than I intended but my printer is all back to working. I used paracord as sleeving again. It's perfectly sized for four 20-some awg wires. I got the wiring done enough that I could reassemble it and then started it on printing upgrades. A self-upgradable machine is still one of the most amazing things to me. As I'm writing this it's printing this Egg-bot since I've been meaning to the last 2 years for Easter and never got around to it. Anyway, not much to explain, here are some pictures!
Lengthening wires
Extending the right-hand Z axis wiring & sleeving
I used wire sleeving from the auto-parts store of the extruder / carriage wires
The rats nest of my Ramps while printing upgrades

3 comments:

  1. The excellent, fascinating website pages retain me arriving here repeatedly. Thank you a whole lot. 123 hp com 3630 install

    ReplyDelete
  2. This is the greatest choice to make before whatever else. Your decision ought to be founded on how you function and the sort of yield you will anticipate from the printer.
    hp printer setup

    ReplyDelete
  3. Self-assertive and amazing in equal measures, a must read.
    buckets

    ReplyDelete